Sybase PowerJ編程指南

第一篇 PowerJ簡介                  
                   
 第一章 PowerJ簡介                  
                   
 1.1 Java語言簡介                  
 1.1.1 Java語言的特點                  
 1.1.2 Java規范                  
 1.1.3 Java和Web                  
 1.2 PowerJ簡介                  
 1.3 安裝PowerJ                  
 1.3.1 安裝步驟                  
 1.3.2 相關產品                  
                   
 第二篇 PowerJ的開發環境                  
                   
 第二章 PowerJ的編程環境                  
                   
 2.1 PowerJ的屏幕組成                  
 2.1.1 Form設計窗口                  
 2.1.2 主菜單欄                  
 2.1.3 工具欄                  
 2.1.4 組件板                  
 2.1.5 狀態欄                  
 2.2 PowerJ的觀察窗口                  
 2.2.1 對象查看窗口                  
 2.2.2 類窗口                  
 2.2.3 對象窗口                  
 2.2.4 文件窗口                  
 2.2.5 目標窗口                  
 2.3 PowerJ的編碼工具                  
 2.3.1 代碼編輯器                  
 2.3.2 參照卡片                  
 2.3.3 參數向?qū)?nbsp;                 
 2.4 目標                  
 2.4.1 目標類型                  
 2.4.2 建立目標的選項                  
 2.4.3 目標目錄下的內容                  
 2.4.4 管理目標                  
 2.4.5 運行目標                  
 2.4.6 JDK1.02到JDK1.1的轉換                  
 2.5 項目                  
 2.5.1 項目的建立和啟動                  
 2.5.2 項目的打開和關閉                  
 2.5.3 管理項目                  
 2.5.4 宏和環境變量                  
 2.6 PowerJ中的源代碼控制                  
 2.6.1 PowerJ對源代碼控制的支持                  
 2.6.2 首次check in項目                  
 2.6.3 check in文件                  
 2.6.4 check out文件                  
 2.6.5 獲得文件的最新版本                  
 2.6.6 打開新的源控制項目                  
 2.7 PowerJ與其他軟件的集成                  
 2.7.1 PowerJ和Microsoft Frontpage的結合                  
 2.7.2 從其他的Java環境輸入源文件                  
 2.8 PowerJ實例                  
 2.8.1 啟動PowerJ                  
 2.8.2 設計用戶界面                  
 2.8.3 設置對象屬性                  
 2.8.4 添加代碼                  
 2.8.5 執計程序                  
 2.8.6 存儲項目                  
 2.8.7 改進程序                  
 2.8.8 調試應用                  
                   
 第三章 PowerJ編程初步                  
                   
 3.1 PowerJ編程的基本概念                  
 3.1.1 Form                  
 3.1.2 對象                  
 3.1.3 事件                  
 3.1.4 PowerJ和AWT                  
 3.2 Form設計                  
 3.2.1 Form設計窗口                  
 3.2.2 向Form中添加對象                  
 3.2.3 組件順序編輯器                  
 3.2.4 可視類                  
 3.3 對象設計                  
 3.3.1 修改對象名                  
 3.3.2 修改對象對應的類                  
 3.4 增加和修改事件處理器                  
 3.4.1 添加和刪除事件處理器                  
 3.4.2 編輯事件處理器代碼                  
 3.5 類的使用                  
 3.5.1 添加新的成員函數                  
 3.5.2 重命名成員函數                  
 3.5.3 添加數據成員                  
 3.5.4 刪除事件. 類. 對象和其它項                  
 3.5.5 調入源文件                  
 3.5.6 指定包名                  
 3.6 模板                  
 3.6.1 Form模板                  
 3.6.2 目標模板                  
 3.6.3 模板文件夾                  
 3.7 拖放編程                  
 3.7.1 拖放編程方法                  
 3.7.2 有返回值的方法                  
 3.7.3 對象前綴                  
 3.8 PowerJ的選項                  
 3.8.1 JDK配置選項                  
 3.8.2 啟動選項                  
 3.8.3 屬性瀏覽選項                  
 3.8.4 PowerJ的命令行選項                  
 3.9 用Batch PowerJ進行批處理                  
 3.9.1 安裝Batch PowerJ                  
 3.9.2 建立目標                  
 3.9.3 Batch PowerJ命令行選項                  
                   
 第四章 PowerJ的程序調試                  
                   
 4.1 基本設置                  
 4.1.1 虛擬機                  
 4.1.2 調試選項                  
 4.1.3 Debugging控制臺                  
 4.2 DEBUG窗口                  
 4.2.1 Call Stack窗口和命令                  
 4.2.2 Locals Window                  
 4.2.3 Watch Window                  
 4.2.4 Assembly窗口                  
 4.2.5 Register窗口                  
 4.2.6 Memory窗口                  
 4.2.7 Threading窗口                  
 4.2.8 在Debug窗口中拖放                  
 4.3 斷點                  
 4.3.1 設置簡單斷點                  
 4.3.2 遇到斷點的情況                  
 4.3.3 Breakpoints對話框                  
 4.3.4 高級斷點選項                  
 4.4 調試跟蹤                  
 4.4.1 跟蹤代碼                  
 4.4.2 調試技術                  
 4.5 Debug類                  
 4.5.1 assert方法                  
 4.5.2 拋出例外                  
 4.5.3 顯示運行棧                  
 4.5.4 調試日志                  
                   
 第三篇 PowerJ編程基礎                  
                   
 第五章 標準類型                  
                   
 5.1 基本概念                  
 5.1.1 完整類名                  
 5.1.2 接口                  
 5.2 Object類                  
 5.2.1 Object類的方法                  
 5.2.2 基于Object類的基本類                  
 5.3 String類                  
 5.3.1 創建String類對象                  
 5.3.2 String類的簡單方法                  
 5.3.3 字符串比較                  
 5.3.4 對子串的操作                  
 5.3.5 將數字轉化為字符串                  
 5.4 StringBuffer類                  
 5.4.1 創建StringBuffer類對象                  
 5.4.2 StringBuffer類的簡單方法                  
 5.4.3 添加文本                  
 5.4.4 插入文本                  
 5.5 Vector類                  
 5.5.1 控制Vector類對象的大小和容量                  
 5.5.2 匹配Vector類對象中的元素                  
 5.5.3 存取Vector類對象的元素                  
 5.6 Point類, Dimension類和Rectangle類                  
 5.6.1 創建Rectangle類對象                  
 5.6.2 改變Rectangle類對象的大小和位置                  
 5.6.3 Rectangle類的與點相關的方法                  
 5.6.4 Rectangle類對象的并與交                  
 5.7 Date and time類                  
 5.7.1 創建Date類對象                  
 5.7.2 比較時間                  
 5.7.3 時間格式                  
 5.7.4 存取Date類對象的時間元素                  
 5.7.5 將字符串轉化為時間                  
 5.8 Color類                  
 5.8.1 創建Color類對象                  
 5.8.2 Color類的簡單方法                  
 5.8.3 HSB顏色模式                  
 5.8.4 Color類中定義的常量                  
 5.9 Font類和Toolkit類                  
 5.9.1 Font類                  
 5.9.2 Toolkit類                  
 5.10 URL類                  
 5.11 AudioClip類和Range類                  
 5.11.1 AudioClip類                  
 5.11.2 Range類                  
 5.12 Applet類和AppletContext接口                  
 5.12.1 Applet類                  
 5.12.2 AppletContext接口                  
 5.13 異常處理                  
                   
 第六章 標準對象編程                  
                   
 6.1 對象的屬性                  
 6.1.1 Label                  
 6.1.2 Font                  
 6.1.3 Visible                  
 6.1.4 Enabled                  
 6.1.5 Color                  
 6.1.6 Parent                  
 6.1.7 大小和位置                  
 6.2 標準事件                  
 6.2.1 事件對象                  
 6.2.2 事件處理器                  
 6.2.3 事件處理機制                  
 6.2.4 事件處理鏈                  
 6.3 編程注意事項                  
 6.3.1 對象初始化                  
 6.3.2 缺省參數                  
 6.3.3 焦點                  
 6.3.4 鼠標移動事件                  
 6.4 標準組件                  
 6.4.1 簡單標簽                  
 6.4.2 多行標簽                  
 6.4.3 命令按鈕                  
 6.4.4 圖片按鈕                  
 6.4.5 檢驗框                  
 6.4.6 組框                  
 6.4.7 圖片框                  
 6.4.8 畫布                  
 6.4.9 列表框                  
 6.4.10 下拉列表                  
 6.4.11 文本框                  
 6.4.12 格式化文本域                  
 6.4.13 滾動條                  
 6.4.14 計時器                  
 6.4.15 Tab                  
 6.4.16 網格                  
                   
 第七章 菜單. 表格和圖形編程                  
                   
 7.1 設計和使用菜單                  
 7.1.1 菜單和菜單項                  
 7.1.2 菜單的常用事件                  
 7.1.3 菜單條和菜單的常用方法                  
 7.2 表格編程                  
 7.2.1 定義和使用Form                  
 7.2.2 布局管理器                  
 7.2.3 Form的ResizePercentages屬性                  
 7.2.4 Form間數據交換                  
 7.2.5 實現接口                  
 7.3 圖形編程                  
 7.3.1 Graphics類                  
 7.3.2 在Graphics對象上作圖                  
 7.3.3 Image類                  
 7.3.4 PictureBox類和PaintCanvase類                  
 7.4 線索                  
 7.4.1 線索與進程                  
 7.4.2 設計多線索程序的注意事項                  
 7.4.3 使用線索                  
 7.4.4 線索的屬性                  
 7.4.5 線索的同步                  
 7.4.6 線索的調試                  
                   
 第八章 添加和創建組件                  
                   
 8.1 添加和使用Java組件                  
 8.1.1 添加JavaBeans                  
 8.1.2 JavaBeans的屬性設置                  
 8.1.3 使用JavaBeans組件                  
 8.2 添加和使用ActiveX控件                  
 8.2.1 ActiveX控件                  
 8.2.2 安裝ActiveX組件                  
 8.2.3 使用ActiveX控件                  
 8.2.4 運行使用了ActiveX控件的程序                  
 8.2.5 使用ActiveX控件的一個實例                  
 8.3 創建JavaBeans                  
 8.3.1 創建新的JavaBean                  
 8.3.2 添加事件                  
 8.3.3 Data－aware組件                  
 8.3.4 Persistence and serialization                  
 8.3.5 一個實例                  
                   
 第四篇 PowerJ高級編程                  
                   
 第九章 訪問數據庫                  
                   
 9.1 數據庫應用實例                  
 9.1.1 概述                  
 9.1.2 啟動數據庫及連接軟件                  
 9.1.3 新建表格                  
 9.1.4 說明對數據庫的連接                  
 9.1.5 創建對數據庫的查詢                  
 9.1.6 排列Form上的約束對象                  
 9.1.7 運行實例程序                  
 9.2 事務對象和查詢對象                  
 9.2.1 事務對象                  
 9.2.2 查詢對象                  
 9.3 使用約束控制處理結果集                  
 9.3.1 約束控制                  
 9.3.2 在結果集中移動                  
 9.3.3 修改數據庫                  
 9.4 客戶服務器高級編程                  
 9.4.1 DataValue界面的概念                  
 9.4.2 不使用約束控制處理結果集                  
 9.4.3 不使用約束控制更新數據庫                  
 9.4.4 帶約束參數的SQL語句                  
 9.4.5 調用存儲過程的SQL語句                  
 9.4.6 動態數據對象                  
 9.4.7 運行中創建事務和查詢                  
 9.4.8 存取原始的JDBC                  
 9.4.9 與PowerBuilder應用程序交互                  
                   
 第十章 網絡編程                  
                   
 10.1 Web應用介紹                  
 10.2 一個簡單Web應用實例                  
 10.3 一個動態Web應用實例                  
 10.3.1 概述                  
 10.3.2 建立applet                  
 10.3.3 創建WebApplication目標                  
 10.3.4 創建Dynamo web站點                  
 10.4 Internet組件                  
 10.4.1 套接字                  
 10.4.2 服務器套接字                  
 10.4.3 Internet組件類                  
 10.4.4 HTTP組件類                  
 10.4.5 FTP組件類                  
 10.5 服務器擴展程序                  
 10.5.1 對接口環境的支持                  
 10.5.2 NetImpact Dynamo服務器應用程序